Thanks to their aesthetic value, many people these days want to install false ceiling in their homes and offices. False ceilings enhance the overall aesthetic value and provide good insulation and better acoustics. You can also use false ceilings to hide any extra wires in your ceiling and create a modern and sleek ceiling design.Â
Today, we are going to examine the false ceiling installation process in detail. From the tools needed for the job to the actual process of installing the ceiling, we will tackle the whole process. So roll up your sleeves, gather your tools, and let’s get to work. Moreover, if you are looking for partition wall services in Singapore like room dividers, wooden partitions, plaster ceilings, etc., LS Partition Wall Singapore is going to be the best choice for you.Â
Materials Needed To Install False Ceiling
You are going to need the following materials to install a false ceiling in your home or office:
- False ceiling or panels
- Metal framework to secure the panels
- Suspension wires
- Screws and screwdrivers
- Measuring tape
- Drill
- Wire cutter
- Ladder
- Personal protective equipment, like safety goggles
Installing False Ceiling Singapore – The Process
You have to follow the process given below when planning on installing a false ceiling for your house:Â
1. Room MeasurementsÂ
Measure the size of the room before putting any panels in the ceiling. Make sure to measure the exact dimensions so as to get an exact estimate of the size of the ceiling. Use these measurements to determine the layout of the ceiling you are going to follow. Make sure to leave out ample space for any light fixtures, vents, or fan hooks.Â
2. Mark The Ceiling Level And Install The Perimeter Frame
Decide the height at which you are going to install the false ceiling. Some people like to have it close to the original ceiling, while others prefer a lower height. But it all comes down to personal preference. Once you have decided on the height, use a marker to mark its position on the walls at that specific height. This mark will serve as a guide to install the perimeter frame.Â
Using this mark, attach the perimeter frame to the wall. Use nuts, screws, and anchors to secure the frame in place.Â
3. Install Suspension Wires
Drill holes into the ceiling at regular intervals for the suspension wires. Insert anchors into these drilled holes to secure the suspension wires. Attach the suspension wires to these anchors and adjust their length. Make sure that the suspension wires hang a little below the desired length of the false ceiling. This is because you can run into short wire issues later on, so you should be prepared.Â
4. Install The Main Runners (Metal Strips)
Attach the metal runners to the suspension wires at the correct height. Also, make sure that the runners are straight by putting a level on them. Secure the runners in place by twisting the suspension wires around them tightly.Â
5. Install The Short Tees
Short tees are small metal strips that run between the main runners. They provide additional security to the ceiling panels. Install these tees at their designated places on the main runners. This will create a grid pattern between the main runners. Make sure that the grid is secured in place.Â
6. Install The Ceiling Tiles And Panels
Lift the ceiling tiles and panels and put them in place on the grills. Adjust the tiles around to ensure that they fit correctly in the grills. Use a level to see if the whole ceiling is flat. Correct any crooked areas. You are done with the installation of a false ceiling in your home.Â
ConclusionÂ
We have discussed the whole process to install a false ceiling in your home. False ceilings are one of the best methods to add aesthetic value to your house. They also provide a sound insulation system and better acoustics. Installing a false ceiling is also a straightforward process. You can follow our guide to better understand this whole process. You can also get professional help if you have any hiccups. Many false ceiling installation services are available in the market for this purpose.Â