Since a poor job when building partition walls can lead to problems, we asked a professional for the correct way to build a partition wall in basement. You will be surprised by the approach we discovered through this conversation. We got some of the best advice on the subject, which will be shared with you in this guide.
This guide will help you build a partition wall in your basement with the minimum expense. You don’t need any fancy tools or materials. Just some essential building tools and some elbow grease will do the job. Enough chit-chatting. Let’s get to building the partition wall to organize your basement and enhance its space.
How To Build a Partition Wall in Basement
Here is the step-by-step guide to build a partition wall in basement. LS Partition Wall Singapore explains the complete details about how to build a partition wall in the basement. Moreover, they also offer professional services for wooden partitions, glass partitions, and room dividers in Singapore.
1. Plan And Prepare
Determine The Purpose Of The Wall
Before you build the actual will, you must decide its purpose. Knowing the purpose will help you choose the right materials for the job. Some essential functions you can get out of partition wall in basements include
- Soundproofing function for music stations or gaming and streaming spaces.
- A simple dividing wall to keep things separate and organized
- An insulated wall to create a warm and cozy space for reading or relaxing.
2. Measure And Layout
- Measure the basement area where you want the partition walls.
- Mark the area with chalk on the floor to outline where the walls will go.
- Make sure to keep in mind easy access to utilities like power supply, plumbing, and HVAC systems.
Check local Building Codes
Before you begin the installation process, ensure you have proper permits from your local housing authorities and that the project complies with the local guidelines. Permits are necessary whenever there are electrical or plumbing changes to the basement.
3. Gather Your Building Tools
Once you are done with the preparation and marking process, you can gather your tools to start the installation process. Here are some important tools you will need to install a partition wall in basements.
Materials
- Wooden or metal studs
- Drywall sheets
- Screws and nails
- Insulation
- Vapor barrier
- Primer and paint
Tools
- Hammer
- Measuring tape
- Level
- Drill or screwdrivers
- Utility knife
- Safety goggles and gloves.
4. Build The Frame
Bottom Plate
First of all, you will have to install the frame to build the whole partition wall. Cut the wooden boards according to the bottom plate size you need. You will have to secure the bottom plate to the floor with the help of construction adhesive. You can also use screws and nails to attach the bottom plate if the floor is concrete.
Top Plate
Cut the wooden board according to the size of the bottom plate. Secure the top plate on the ceiling with nails and adhesive tape.
Vertical Studs
Cut vertical studs according to size and fit them between the top and bottom plates. Make sure to attach the studs at an equal distance from the center of one stud to the next. Secure the studs in place as well with nails and screws.
5. Attach Insulation And Wiring
Insulation
If the partition walls separate heated and unheated spaces, install insulation materials between the studs. For this purpose, you can use fiberglass batts or foam pieces.
Wiring
If the partition wall will have electrical outlets, you should also run wiring through the studs. An electrician can help you with this step of basement partition wall installation.
6. Install Drywall
Cut And Attach Drywall
Cut the drywall according to the size of the partition wall frame. Once you have proper-sized panels, you can attach the drywall to the studs with drywall screws. Make sure that the screws are correctly tight.
Tape The Seams
Apply tape to the areas where two drywall panels meet. Smooth a layer of joint compound over the tape. Allow the compound to dry, then use sandpaper to create a smooth finish.
Apply Primer
Once the drywall joint compound is smooth, you can apply a layer of primer to prepare it for paint application.
7. Finishing Touches
Paint And Decorate
You can paint the drywall the right color to match the rest of the basement. You can also use decorative elements like hangings, pictures, or other materials. This will make the area inviting and suitable for your personal style.
Install Doors And Openings
If you want the partition wall to have doors or windows, you can cut the drywall. Once you have the proper gap, install the frame for the door and window. In the end, install the door or window panels into the frame. You can also paint these frames to match the rest of the area.
Conclusion
The whole process to build a partition wall in basement is quite easy and doesn’t need any special skill. With the right tools, you can install the whole partition wall quickly. Ensure to have the proper permits before making any changes in the basement.
If you face any difficulties during the installation process, you can take the help of professionals. Many companies can help you build a partition wall basement in Singapore for a nominal fee.