If you want to build a brick partition wall in Singapore, this guide is for you. Whether you need to separate your dining area from your living room or create a quiet workspace in your HDB flat, a brick partition wall is a strong and lasting solution. I’ve personally worked with homeowners across Singapore who wanted better space division in small apartments or larger homes.
In this guide, I’ll cover each part of the process, starting from planning and choosing what to build to selecting materials, building methods, and local guidelines. Also, LS Partition Wall Singapore explains the build a brick partition wall in Singapore. Moreover, they also offer professional services for false ceiling, plaster ceiling, and partition walls in Singapore.
What Is a Brick Partition Wall?
A brick partition wall is a non-load-bearing wall. It does not support the main structure of the building but helps divide the interior space. In Singapore, these walls are common in both resale and new HDB flats, condos, and landed properties.
Why People in Singapore Choose to Build Brick Partition Walls
Singapore’s urban homes often require smart space planning. A brick partition wall in Singapore can help separate functional areas, like dividing the kitchen from the living room or creating a study nook in a studio apartment without changing the main layout. It’s a long-lasting, fire-resistant solution that also helps with soundproofing.
Unlike drywall or glass partitions, brick walls are sturdy, low-maintenance, and weather-resistant. In humid Singapore weather, they hold up better and offer more insulation than lightweight alternatives.
What You Need to Build a Brick Partition Wall
Be sure to have everything you need handy before you get started. You can buy them from shops like Horme Hardware or Lian Seng Hin in Singapore.
Materials:
- Clay bricks or solid cement bricks (standard size: 215mm x 100mm x 65mm)
- Cement
- Sand
- Water
- Optional: Waterproofing solution (for bathrooms or kitchens)
Tools:
- Trowel (for applying mortar)
- Spirit level (for checking straightness)
- Measuring tape
- String line
- Brick chisel or cutter
- Bucket or mortar mixing tray
- Gloves, safety glasses, and dust mask
How to Build a Brick Partition Wall
I recently helped a friend in Sengkang build a brick partition wall in his kitchen. Here’s the same process broken down into simple steps:
1. Measure and Mark the Area
Place a measuring tape where you need the wall to see the exact spot on the floor. Use a chalk line or masking tape to draw a straight guideline. In HDB flats, avoid building walls that attach directly to windows or doors. This may go against HDB regulations.
2. Check for Permission
If you live in an HDB flat, you must get permission from HDB before building any wall. Hire a contractor who has experience with HDB renovations. In condos, check with your Management Corporation (MCST).
3. Prepare the Area
Clear the area. If there are tiles on the floor, lightly chip the surface to help the bricks stick better. Use a damp cloth to clean the surface and remove all the dust.
4. Mix the Mortar
In a mixing tray, combine 1 part cement to 3 parts sand. Add water slowly and mix until you get a thick paste. For wet areas, you can add a waterproofing additive.
5. Lay the First Layer of Bricks
Apply a layer of mortar on the floor. Place the first brick on the line. Use the handle of the trowel to gently tap the bricks into position. Check the brick with a spirit level. Repeat this step for each brick in the first row.
Tip: The first row is the most important. If it’s not level, the rest of the wall will be crooked.
6. Build Upwards, Layer by Layer
Spread mortar on top of the first row of bricks. Place the second row of bricks in a staggered pattern. This means the middle of one brick should sit on the joint of the two bricks below it. This makes the wall stronger.
Check each row with the spirit level. Use the string line as a guide to keep the wall straight from end to end.
7. Cut Bricks If Needed
Use a brick cutter or chisel if you need to fit bricks into tight spots, such as near the ends of the wall or around pipes.
8. Let the Wall Set
Once you reach the desired height, stop and let the mortar set. Don’t touch or move the wall for at least 24–48 hours. If the weather is very humid, it may take longer to dry.
9. Finishing Touches
After the wall is dry, use a trowel to smooth the joints between the bricks. You can plaster the wall or leave the bricks exposed for a rustic look.
Things to Keep in Mind When Building a Brick Partition Wall
- Humidity: Singapore’s weather is humid. Make sure your wall is built with proper drying time in mind. If not, it can develop cracks or fungus.
- Noise Reduction: If noise control is important, use solid bricks. Avoid hollow ones, as they allow sound to pass through more easily.
- Space: In smaller homes, use thinner bricks to save space. Some homeowners use half bricks for internal partitions.
- Approval: Always get written approval before starting work in HDB or condo units.
Importance of Brick Partition Wall in Singapore
A brick partition wall adds real value to a home in Singapore. It offers privacy in shared rooms, blocks kitchen smoke from reaching other areas, and gives you more options for organizing your space. In homes where family members work from home or study online, having quiet zones is essential.
Conclusion
Now you know exactly how to build a brick partition wall in Singapore. It’s not just about bricks and mortar. It’s about improving the way you live in your home. Whether your goal is to block sounds, have more privacy, or design your spaces better, a partition wall is very effective.
If you’re planning to build a brick partition wall in Singapore, remember to take your time, have the proper tools handy, and follow each step properly. For bigger or more complex projects, it’s best to hire a reliable local contractor who knows the rules and can do the job right.